We’re at 2/11 operatives complete and just waiting to be based - I am going to be good and hold off and do that all in a batch even though all my instincts say to just do it now, and inevitably forget how I did it 😂.
Door update. Inner door now sanded & oiled with linseed oil. New outer door has a second coat of undercoat and window mullions. Second coat of bottle green paint to follow tomorrow. #miniatures#doors#WoodWorking
Hey there #WarhammerCommunity, I'm trying to make some basing for my titan and I need opinions. I 3d-printed these and then placed a sledgehammer on top before heating to simulate a crushed effect under the tread of the titan. Does it work or should I go for more?
Ok, friends. Five tiny TRS-80 Model III models are in the shop!
🎉
This is a bit of a trial to see if anyone digs this sort of work. If not, it's entirely possible that these will be the only five I make so... perhaps a limited series?
😸
If you have questions then feel free to ask them in the thread or via DM. If you have retro PC nerd friends then feel free to send them my way.
I for one will finally be bothering my ass for a change and downloading this ruleset - and discussing with my 3D printer endowed pals. I can only recommend you do the same, everything @pidgeon_pete turns his hands to is a pure joy.
Well done pal on getting this one across the line!
I have an arbitrary goal of wanting to hit 52 minis of any given faction I am working on. With the Leviathan ones I ended up at exactly 51 Primaris Blood Angels so I grabbed this guy to hit my goal!
This is your friendly reminder that I make and sell delightful miniature retrocomputers like TRS-80s, Osborne Ones, and the occasional big friends like Connection Machines and Crays.
I'm a retired nerd who's living the dream. Well, if your dream is working in your garage on tiny art machines. 😺 ⚙️ #retrocomputing#miniatures#trs80#cray#shamelessSelfPromotion https://store.transmutable.com/
I must have knocked her over by accident because at some point her judgemental finger fell off. Time to check the bits for a spare Necron finger to replace it with. I'm pleased with the clothing, need to shade and layer the face and the door she is standing on feels like it could use some rust.
The titan's torso is assembled enough to get a glimpse at the final product and he's HUGE! For reference, the can of Zandri Dust spray primer is 7.75" tall and that chainsword is 14.75" long from tip of blade to bottom of powercell. This guy is a towering 22.5" tall and he doesn't even have his carapace armor, guns, or void shields on yet!
I finally have two electronic Tiny TRS-80 Model III miniatures up for sale.
🎉
I'm not sure whether they will sell at $84 before shipping & tax so if these don't sell then I guess they'll be pretty unique!
🤷
Note: The display is driven by a wee board that runs either CircuitPython or Arduino programs, not an emulated version of TRS-DOS or another retro-OS. That said, it also has WiFi and BluetoothLE so pros and cons. 😸 #miniatures#retrocomputing#sales#trs80 https://store.transmutable.com/l/e-trs-80-model-iii
Hey, if you're wondering how I use FreeCAD to design parts like this miniature computer case then click into this thread where I'll show the step-by-step.
⚙️
(The rest of the thread will be marked unlisted so that I don't blow out everyone's feed.) #CAD#FreeCAD#miniatures
Knight Tyrant Complete!
Weather finally cooperated enough to allow for varnishing of 'Sardonic Feculence.' All that was left to do was to apply some Blood for the Blood God and Nurgle's Rot technical paints to achieve a suitably blood/pus-filled look.
Next on the painting desk: 'Slaughter's Serenity,' my Khorne Knight-Castigator. 'Death of Duty' is short! @warhammer40k@Bluesheep
One spool of filament down and we're up to the knees on the Warmaster Iconoclast. From the base of the foot to the top of the knee joint is 8.5 inches, so this is going to be a big one when it's done. Currently printing the thighs, which are a 25 hour print-job. Next update in a few days!
I’ve been slowly learning resin 3D printing! It’s been going horribly, but I finally got my first full plate of minis and they’re amazing! #minis#miniature#miniatures#3dprining#resin
Okay. So in my sleep deprived wean induced state I’ve had a crack at scribbling some thoughts on Mastodon as a #Hobby Space in particular for all the folks who maybe still have a foot in #Twitter
Apologies in advance for all the inevitable grammatical and spelling mistakes. I’m tired, and make them at the best of times.
I finally finished up my #FinalGirl#miniatures but having issues with how I want to photograph them for the blog.
Here are some examples of a really stylized version I did, that I think captures the #horror aspect of the game but I'm not sure if a more standard set would be better so people could see the colors used better.
Thoughts? I'm putting a poll in the replies to this post if anyone is interested.
While the Warmaster Titan's torso starts on the printer, it is time that I begin posing the legs. I had to get creative with how I tightened it down to keep the Gorilla Glue's expansion from moving it out of the pose I wanted. This guy is BIG as seen by the the Bloodmaster by its foot.
Ok retrocomputing folks, the "Help Make the VT100" pre-sale is live!
🎉
To thank supporters for helping fund tooling and time for production I've set this at a lower price and have included a bonus cutie VT100 mini made only for this sale.
💻
If a 1:3 scale working VT100 sounds like something you'd like then head over to the store: https://store.transmutable.com/l/vt100-pre-sale #miniatures#retrocomputing#vt100
I swear I’m not just screaming #Mordheim at you because I want to, swear @erikcats made me do it… that and I want to scream Mordheim at you. #FacesOfMordheim 1/7
The Brothers of the Green Handkerchief. As nice a mob of religious zealots as you’re ever going to meet - including some situably badly named characters including Captain Heinehienicksoon Von Karmle Glassen Auge and his three dugs, Duggle, Gruffe, and Wafver Wafve.
And that's just what they'll do.
Weekly progress update on the Warmaster Titan! The legs are fully assembled and posed. This is a BIG model. I'm fairly sure the sizing is within an acceptable margin of error based off the height chart GW put out. Especially given that the Knight has a waist extender giving it a bit more height.
I've been a little quiet lately, but that's because I've been getting this monstrosity prepared for printing. The voices of the Warp have spoken and they demand a vessel. Not just any vessel but a 40k scale Warmaster Iconoclast Titan. Yes, I have gone quite insane.
Does something this large even count as a "miniature" anymore?