Cosa che ho imparato:
Se stampi in 3D una piastra alta pochi millimetri e fai un riempimento a zig zag per risparmiare filamento, una volta staccata dalla base il pezzo si imbarcherà per effetto del calore di stampa e della ritrazione del materiale a freddo. Per evitare fai meno il taccagno e usa un riempimento a griglia o cubico e il pezzo non si imbarcherà perché la struttura interna sarà meno uniforme. #Stampa3d#3DPrinting#SbagliandoSImpara
I finished a new three color print today… contemplating doing a whole series of balls. Another relief print on handmade paper created with 3D printed printing plates.
in #3dPrinting you need to keep your 3d filament (the ink basically) super dry, because it absorbs water, which makes it brittle and generally fucks with it
a lot of people come up with very expensive or complicated solutions. i just bought a 10EUR back of 1kg re-usable gel silica used to dehydrate car interiors, but it in an airtight-ish ikea box and my humidity reader is struggling to read the humidity because it's too low ✨
... the cover: materialized and in its natural habitat.
The wall socket box was too shallow to hold a breaker, 24V transformer and #Esp32 board with a relay.
Not very aesthetic, but it covers all the door unlocking junk.
Here's the 3d printed housing and battery contacts completed. Was visiting my daughter a few weeks back and knew she could get the housing printed so I quickly whipped up a design in #freecad and sent it over to her.
The battery contacts are 1mm thick brass plate that I cut and filed to the correct shape based on a cardboard template. They turned out pretty nice looking.
Is there a #Mastodon instance dedicated to amateur #running? Races, training, etc.
I need to get some thoughts and opinions on training and racing out of my head. I could post them here, but this instance is primarily dedicated to Free Software. Most of my followers are probably either expecting posts related to that or cybersecurity, math, science, cryptography, etc. IE, not running.
Posting to a fitness-dedicated instance probably makes the most sense. Or setting up a blog.
@atoponce My instance is also dedicated to free softwares but it doesn't prevent me from discussing #running#writing#3dprinting with people of other instances. I follow the #running hashtag for instance and get some feedback/discussions/kudos from the community.
Manyfold v0.66.0 has been released! This release focuses on accessibility again, particularly around keyboard control of the 3d models. But, in order to make that happen, we had to do a big rewrite of the renderer that should make it much faster and smoother! We hope you like it 😄
My boss got sick of me bringing in prints from home off my Bambu Lab printer and comparing them to our Enders so he said “Fuck it!” and ordered two Bambu Lab printers for the office. #3DPrinting
Je ne pensais pas qu'il y avait un public si prompt à réagir auprès des fans. À peine l'ai je ajouté que j'ai eu quatre commandes à la suite.
C'est la première fois que je faisais de l'animé, et c'était plutôt agréable.
À moins que ce soit d'écouter la chanson 4 ou 5 fois par jour depuis deux semaines.
Is this a bad batch? No, it's not. It's an amazing batch of The Bad Batch. Star Wars is forever, for everyone (as is 3D printing). These action figure toys were designed by the skilled @Playactiontoys & 3D printed live on https://twitch.tv/MakerDeck :)
suddenly i had a revelation: my nozzle sock i added to my mini may be blocking the part cooling fan (which i've heard is already a bit on the weak side)
stupid if true (but would explain their lack of a default sock) (i need to get one that fits better just in case)
i don't have the energy to actually test this (question mark)
this PLA is stringing so badly and i've lowered the temperature a LOT based on the temperature tower (down at 195 for a decorative non-structural item) plus gave it some time in the dehydrator
anyone have opinions on or experience with matterhackers standard PLA? #3dprinting
Feeling relatively clear today so thought I'd get a few of the wife's requested prints designed but for some reason #FreeCAD just wouldn't start so went looking for alternatives and stumbled upon #dune3d and OMG what a banging new #CAD tool, it's a very fast core clearly built around keyboard shortcuts but has a lovely context menu you bring up with space and for designing simple parts has absolutely everything I need today. I am very impressed. #3dprinting#design#partdesign
I'm thinking about printing a flip-down MagSafe iPhone charger to mount under the kitchen cupboard. This is kind of the idea. I'm still working out how to route the cord. I'm imagining magnets to hold it in position either flipped down or flipped up, but haven't modeled those either.