Printed a Noted Core with wood impregnated filament.‡ This is a very boring beige, but I wondered if maybe it was one of those things where "boring" actually kinda worked.
Asked wifey her thoughts & - to summarize - #3DPrinting looks best when it embraces its nature. I love the translucent colors with little sparklies, or really nice color transitions, or just simple vibrant color. This just looks... meh.
Designed and #3dprinting some aquarium hose couplers because I refuse to pay €20 for a little chunk of plastic. There is no way this can go wrong right? Right? 😂
I was somewhat skeptical of multi-color prints on the Bambu Lab printers using the AMS but now that I've started to design things I'm trying to be efficient and I've got it down to a single color change after the first layer and there is no tower of wasted filament.
For these prints it's just a single layer of text on the bottom but I'm pleased with the very minimal print time it adds and almost zero waste.
Minor Update re the #Accessibility tool I've been working on for a friend for whom Apple's palm rejection absolutely refuses to work.
We've prototyped the cover + hole shape over the trackpad & it got a 👍. Now I've gone back and added 4mm thick leather wrist wrests & there's an internal cable run for charging the trackpad.
the lighter colored "wood" in the picture is a magnetically attached plate that we can swap out if he / anyone else needs a different hole shape.
I have the pao'er! Yet another 3D printed @Playactiontoys Star Wars action figure toy model was released last week. My weekends have been jammed lately, but I was able to complete Rogue One's Pao in good time - thanks, again, to https://twitch.tv/MakerDeck for helping make making a community thing.
#plasticity3d for designing small functional #3dprinting parts (electronics cases, ...), worth trying?
From having used FreeCAD/SolveSpace/Fusion before I really like the constraint based modeling, but something less cumbersome would also be nice. Shapr3d looks really nice but the subscription & cost is putting me off. Plasticity's pricing & perpetual licensing would be acceptable.
The free version of Fusion would work, but the UX & app streaming experience is horrible, do not want.
@rasterweb day 4 of my staycation, more #3DPrinting, baking banana bread, laundry, and I may attempt to organize the chaos table in the kitchen. Oh! And I get to meet with my tattoo artist for a design preview! That’s something more fun haha.
Say I wanted to do #3Dmodeling (for #3Dprinting), which #CAD software should I go for? Maker, selling some stuff. Parametric is a must.
I use #Shapr3D which is great but getting pricier ($300/year). My subscription is up for renewal and I’m on the fence. I don’t know if I want to get into #Fusion360 because I don’t trust Autodesk (free for <$1000 profit, $680/year otherwise).
Oddly enough, #SolidWorks has a maker version now ($48/year for <$2000 profit, a bajillion otherwise).
Couldn't find any super basic standing 10x15cm picture frames so I'm making my own. Also gives me the excuse to play around with Wood-PLA filament. :blahaj:
Picture in the frame can be found here: https://wallpapersafari.com/w/ZQDWmM
Expecting some circuit boards today maybe. Exciting - my first use of #KiCad right through to actually producing PCBs, though I've worked up a few schematics in the past, and one other PCB layout.
Haven't bought any new boards for a project in a couple of years either, so it's nice for that reason too.
Yay - my circuit boards arrived yesterday evening.
Have been playing with getting a good fit into my unusually-shaped enclosure and think I've managed it. A hot soldering iron is very useful for sculpting changes in the 3Dprinted shell.
Accidental fumes from PLA are thankfully not too nasty – a bit sweet smelling.
Yes, it looks like a large kumquat, and not by accident. The "yellow" solder resist on the boards is nicely a bit more on the orange side of the spectrum than the photo captures, making it rather on-theme with my plastics.
@3dprinting#3dprinting, I have a crtpuch and when I press the button to home the nozzle, the nozzle goes too far down and crashes into my build surface. I’ve tried adjusting the probe offset up and down though nothing seemed to change, any help?
Radiolaria are marine protozoa that build incredibly intricate glass-like skeletons from silica. We are working on an art project generating radiolaria inspired structures and #3dprinting them. Here’s one of our first attempts
I don't have enough time to keep up with all my projects: #3dprinting, #coding, #ClassQuiz, #smarthome, #school, #gaming and #tabletennis. I'd really appreciate having a helping hand regarding @classquiz who can take on some small(ish) issues I've been aware of for months, but at the time, I am focused on other projects (also in the regard of coding): There's @homeassistant and #FediPrint.
Today’s quick 3d print of a “pill placer" for our old dog. Big enough for the capsules he has to take 3x a day and hopefully more accurate and less intrusive than my fingers, with less chance of a munched finger.
Still have a few kinks to work out, but this little truck is really coming along. It's been fun to figure out how to break it into components that will print/assemble well. #3dprinting