mcfly, (edited ) German The shavings must fly #woodworking
dalfen, My son made a functional shave horse from scrap wood, twigs, and mostly all hand tools (except for a handheld drill).
kbob, When you don't have a drill press...
chrishuck, @kbob I’ve totally made printed drill guides to ensure consistent spacing between mating parts, even with a drill press.
frew, All of these mortises done (are they tusk mortises if they go sideways too?) Next I need to make three more wedges. #woodworking
ottaross, @frew Nice! A good tight fit.
I wonder if the wedge should be rotated 90 degrees though? As the wedge tightens inside its mortise, the way it's shown it would be trying to split the wood between layers of grain. If rotated it would be tightening the assembly, no?
frew, @ottaross yeah I considered that, but I’m following an existing design and decided to leave it unchanged. The nice thing about side to side is that I get two wedges that have much more surface area, but I agree that up and down would be less risky
curious_oecher, German So Leute, die Latte ist aufgehängt. Und zwar ziemlich hoch... Ich kann nur sagen: wow
https://www.youtube.com/watch?v=5bPrsif6Q9Y
Ich mache hiermit mal auf die neue SWR Reihe Meisterstücke aufmerksam, die direkt im ersten Beitrag ein richtig klasse Möbel präsentiert. Absolut bemerkens- und sehenswert.
Viel Spaß beim Ansehen
#handwerk #holzwerken #woodworking
karlnelson, After about 6 months, I finished up a guitar I built for my 16yr old kid. We used maple (which is heavy, but sturdy). It's a Telecaster body style, and he picked out the electronics. We're both pretty happy with how it turned out!
Wood being clamped together
Guitar body with copper shielding
Guitar with the pick guard off, showing off the wires
ubo, @karlnelson 👍🏼 Beautiful work and I am sure it sounds great too!
mcfly, German @karlnelson like super nice. But more importantly how does it sound?
fozztexx, For the last couple of days I've been working on an #OpenSCAD program to create custom #Pantorouter tenons. Set the tenon dimensions, the inner bit/bearing, outer bit/bearing, rows/columns, and it does all the math. But after printing out a full size paper preview I think what I want to do is going to be much bigger than the Pantorouter can handle. #woodworking
Paper printout on 8.5x11 paper with full size tenons filling entire sheet
fozztexx, @moira @NF6X I'm probably overthinking it. Who cares if there's a tiny dent that gets transferred to the tenon in the center? It’s just more space for glue!
moira, @fozztexx @NF6X I... now that you say it, I think I've seen people do that intentionally. Have small channels, I mean. So you don't get trapped air and such. And similar reasons.
Roofhare, Been playing with plywood patterns based on hexagonal shapes. This creates Esher like structures. These will be used as coasters by my friend who is building a bar in his house.
I took my inspiration from Michael Alm (see https://www.almfab.com/ or his YouTube channel)
SketchyAbstractions, Hey everyone. I'm trying to keep focused right now. I finally managed to release a video. It's nothing crazy, just a build video of my coffee table.
If you're interested I'd greatly appreciate you checking it out or sharing. Thank you very much.
I want to say something more... But I don't know. Tell the people you love what they mean to you. Make sure they're okay.
Gina, @SketchyAbstractions Nice to watch and I love the result! Some day when I have an actual shop and better tools I'd love to make quality stuff like this.
Also appreciated the lack of ads btw, instant subscribe. 🔥
tmaz, French "Et soudain, sur la froide table en fonte, la dryade se réveille et s'étire."
DazeEnd, One of the best things about Mastodon has been discovering and connecting with new communities by following hashtags. Most of the people I follow are people I’ve met through different tech communities (mostly iOS). Following hashtags like #lakelife #woodworking #DIY #wine and #breadposting has connected me to many people with similar interests that I probably wouldn’t have crossed paths with otherwise. And it’s brought welcome low-tech offline content into my feed.
frew, Got most of the breadboard ends done. I cannot believe how much work those are! Basically four resaws. Anyway everything fits and I’m gluing up the leaves. The breadboards need to fit about 1/8” to 1/4” deeper. Will do that part tomorrow and hopefully most of the undercarriage too. #woodworking
Flux, I am undeterred. Last of three frames for the awning to go over the front of my timber-framed office/shed.#woodworking
Flux, Chopped this nice angled mortice in the wrong face(-palm). #woodworking #facepalm
mrcompletely, Component of a much larger work in progress. Jigsaw cut wood, acrylic and metallic paints.
#MastoArt #mandala #painting #woodworking #wip
psyentist, Apologies for double posting this image but:
Does anyone know any businesses in the Ventura County or San Fernando Valley areas which offer custom wood CRC work? Where I can just send them a file and get it machined?
Everywhere seems like they offer metal only even though I'd expect wood to be easier to work with. And I want to make them ~2ft which is a bit too big for the LA library maker space I think.
scarpyro, French Une petite sculpture de tortue marine, en platane
TheOtterDragon, French @scarpyro Awwww :blob_cat_aww:
mcfly, (edited ) German mc.fly and #woodworking
I have a new temporar woodworking space.
a thread (to be extended...)
It is anti-kraak - therefore temporar - and not in the best condition. But there's a space. 🎉
Also it is awesome. It is in kind of a park near Rotterdam.
(for those who know the precise location - please kinda keep it for yourself for now...)
I am sharing this space with @ChrisNap
#houttuinhuis
GustavinoBevilacqua, German Also, in such an old building, don't forget to match the table top with the floor to have it dead horizontal (been there, done that).
A laser level would be helpful.
mcfly, German @GustavinoBevilacqua The floor is surprisingly level.
Also the building is under historical protection which restricts some changes.
tmaz, French Allez, aujourd'hui je me suis attaqué à un vieux pied de buis en train de sécher depuis belle lurette, à la recherche de quelque vieille loupe (ou broussin) pour fabriquer de jolis objets.
Découper un morceau de bois de ce type, c'est comme ouvrir une géode : on sait que ce sera forcément étonnant, et on espère que ça sera exceptionnellement beau 🤩
C'est parti ! ⬇️
#woodworking #couteau #coutellerie #bois #ebenisterie #knife
tmaz, French Alors cette souche est un petit modèle, donc on ne pourra plaquer un meuble avec le bois qu'elle contient, mais ça vaut le coup quand même. Si déjà on peut en faire un ou deux manches de couteau, ce sera chouette.
#woodworking #couteau #coutellerie #bois #ebenisterie #knife
tmaz, French Je suis assez content de ce premier essai ! Reste à trouver comment utiliser et valoriser tout ça.
La prochaine fois, je passe à la souche XXL 😎
#woodworking #couteau #coutellerie #bois #ebenisterie #knife
scarpyro, French J'ai refait un panda roux :shibasmile:
Il est en platane. Le blanc est la couleur naturelle du bois. Le noir c'est pyrogravé. Le corps c'est de la betadine puis de l'huile de lin. Les rayures de la queue c'est du brou de noix dilué
#sculpture #WoodCarving #MastoArt #RedPanda #PandaRoux #WoodWorking
Même sculpture sur une branche de sureau
Autre vue du panda roux sur la branche
Vue de profil du panda roux
tmaz, French #microartisanat du jour : une bague de lecture en buis de la Manche.
Il va falloir améliorer le modèle : le trou du pouce est trop grand même pour moi, il faut que la partie inférieure soit plus plongeante et la bague devrait être plus épaisse pour plus de stabilité. Elle ne fait que 4,5mm d'épaisseur dans le cas présent, parce j’espérais m'en servir aussi comme marque page : mauvaise idée 👎
curious_oecher, German Done. Schlicht und einfach. Zur Aufbewahrung der Taufkerze und Karten des jüngsten Nachwuchses.
Kleine Fichtenholzkiste mit Nussholz-Nägeln an der gefälzten Eckverbindung. Deckel Leimholz mit Gratleisten innen gesichert.
Alle Verbindungen mit #Handwerkzeug realisiertKleine Fichtenholzkiste mit Nussholz-Nägeln an der gefälztrn Eckeverbindung. Deckel Leimolz mit Gratleisten innen gesichert
Kleine Fichtenholzkiste mit Nussholz-Nägeln an der gefälztrn Eckeverbindung. Deckel Leimolz mit Gratleisten innen gesichert
Kleine Fichtenholzkiste mit Nussholz-Nägeln an der gefälztrn Eckeverbindung. Deckel Leimolz mit Gratleisten innen gesichert
ubo, German @curious_oecher 👍 Schlicht und einfach ist immer gut und in diesem Fall auch wieder sehr schön!
vvv, German Eine Frage für die Holz-Heimwerker:
Ich habe einen winzigen Keller (4 m²) in dem ich absehbar öfter #WasMitHolz machen werde.
Ich suche daher einen Werkstattsauger/Absaugung mit folgenden Eigenschaften:
- < 150€
- Auffangvolumen >= 10L, aber so kompakt wie irgend möglich!
- nicht zu laut
- Staubbeutel
- kein Muss: Gerätesteckdose
Hat jemand Empfehlungen oder Erfahrungen?
#woodworking #werkstatt #HolzArbeiten #HolzWerken #IrgendwasMitHolz #Holz #Heimwerken #FragFedi #FragDasFediverse #diy
ubo, German @vvv Für die Werkstatt habe ich mir vor ein paar Jahren mit einem Lidl(?) als Basis eine Staubabsaugung mit Abscheider gebastelt. die recht gut funktioniert: https://www.lumberjocks.com/showcase/yadc.137517/
Zusätzlich besitzen wir auch einen Einhell Nass-Trockensauger TE-VC 2340 SAC dessen Preis-Leistungsverhältnis m.E. gut ist. Lautstärke nicht gering, aber in Verbindung mit Elektrowerkzeugen, z.B. Oberfräse, m.E. absolut kein Kriterium. Für Staub sehr brauchbar, für fette Späne von Abricht-/Dickenhobel wohl weniger.
ubo, German @vvv Langer Rede kurzer Sinn: für Staub im Heimwerkerbereich muss es m.E. nicht zwingend teuer werden.
vilain, French J'ai fabriqué un tout petit requin en bois d'if.
Il est mignon.(la tige dorée mesure 0,5 cm de diamètre)
Qbitzerre, Anybody know where to get double jointed hinges like this? #woodworking
hinge joining planks in between extreme positions.
hinge in position opposite to flat.