thatdamnelf

thatdamnelf, 13 days ago to miniaturepainting

Hope everyone's having a good day, I managed a bit of progress on some Witch Aelves; just started the color blocking, but since it's been ridiculously humid and I've been unable to prime models, I'll call this a win!

#hobby #HobbyStreak #miniatures #MiniaturePainting #AoS #DaughtersOfKhaine #AgeOfSigmar #Warhammer #WarHamFam #WarhammerCommunity

thatdamnelf, 22 days ago to ageofsigmar

New Case, Who Dis?

So after hearing about those Jucoci miniature transport cases for so long, I finally saw one in the wild, and I must say they look very nice. All this to say, I now own a case that can actually hold a Chaos Knight army without playing Tetris to keep all the spikes from tearing each other apart.

@warhammer40k

#miniatures #40k #ChaosKnights #WarhammerCommunity #WarHamFam #Warhammer40k #hobby

thatdamnelf, 28 days ago to Nutanix

Having finished the Cauldron of Blood it's time for something a little less intricate, as a treat! The Endless Spells in AoS are some of the most fun models to paint, and since they're formed of magic who cares if you pick out all the details? But in this case... a blood snake is made of blood, so of course it's (three different shades of) blood red!

#hobby #HobbyStreak #DaughtersOfKhaine #AoS #miniatures #MiniaturePainting #AgeOfSigmar #WarHamFam #WarhammerCommunity #Warhammer

thatdamnelf, 29 days ago to ageofsigmar

I decided to push forward on the Blood Cauldron, and I have now reached a point where I'm happy with it. There's always more things that COULD be done, but I'm calling it here before becoming lost in the weeds.

#hobby #HobbyStreak #AoS #AgeOfSigmar #Warhammer #miniatures #MiniaturePainting #DaughtersOfKhaine #WarHamFam #WarhammerCommunity

thatdamnelf, 1 month ago to ageofsigmar

I'm at that weird stage with a model where I need to decide if "enough is enough" or go all in and keep at it forever.
What do you all think? Should I keep finding more and more details? Also, is there anything glaring?

#hobby #HobbyStreak #AoS #DaughtersOfKhaine #AgeOfSigmar #Warhammer #WarHamFam #WarhammerCommunity #miniatures #MiniaturePainting

thatdamnelf, 2 months ago to 3DPrinting

Titanic Torso!

The titan's torso is assembled enough to get a glimpse at the final product and he's HUGE! For reference, the can of Zandri Dust spray primer is 7.75" tall and that chainsword is 14.75" long from tip of blade to bottom of powercell. This guy is a towering 22.5" tall and he doesn't even have his carapace armor, guns, or void shields on yet!

@warhammer40k

#hobby #HobbyStreak #miniatures #3dPrinting #40k #WarhammerCommunity #WarHamFam #Titan #Chaos #Warhammer40k #3dPrint

thatdamnelf, 2 months ago to ageofsigmar

Porphyrion Prepared

If you've never seen one before, here's an Acastus Knight Porphyrion fresh out of cleaning bath to remove the mold release. This is going to be a big boy. That one hull chunk on the right is larger than the entire upper carapace of a Questoris/Abominant class knight, larger than a Cerastus as well by the look of it. This is why I haven't posted Titan progress lately.

@warhammer40k

#hobby #HobbyStreak #40k #WarHamFam #ChaosKnights #WarhammerCommunity #miniatures

Big Salamanders Update (lemmy.world)

I’ve been busy over the past few months adding to my Salamanders....

thatdamnelf, 3 months ago to miniaturepainting

Khorne Daemon Allies

Taking a break from the Titan (not really, the epoxy is just drying) to paint something a little different. So I went ahead and painted up a couple Khorne Daemons to be allies, starting with two characters. These were fun to do and were relatively quick to paint. I'm especially proud of the Skullmaster's sword.

@warhammer40k

#hobby #HobbyStreak #Khorne #40k #miniatures #MiniaturePainting #WarHamFam #WarhammerCommunity #Warhammer40k #Chaos #ChaosDaemons

Karanak, The Hound of Vengeance miniature by Games Workshop.

WIP plasma gun marine (lemmy.world)

thatdamnelf, 3 months ago to ageofsigmar

These Foots Are Made For Stompin'

And that's just what they'll do.
Weekly progress update on the Warmaster Titan! The legs are fully assembled and posed. This is a BIG model. I'm fairly sure the sizing is within an acceptable margin of error based off the height chart GW put out. Especially given that the Knight has a waist extender giving it a bit more height.

@warhammer40k
#hobby #HobbyStreak #40k #miniatures #Titan #WarHamFam #WarhammerCommunity #Warhammer40k #3dPrinting

3d printed Warmaster Titan model with a Chaos Knight model in front of it for size comparison. The top of the Knight model barely comes up to the Titan's knee joint.

'Nids update (lemmy.world)

Working on these guys between Salamanders purchases. The Psychopage spew came out exactly how I hoped it would and you can’t really see it in the pic but getting to all the teeth wasn’t as bad as I thought. Need to grab a few new paints for the wings though because I don’t think I can get a good fleshy wing color that...

thatdamnelf, 3 months ago to 3DPrinting

The Forges Move Forward

While the Warmaster Titan's torso starts on the printer, it is time that I begin posing the legs. I had to get creative with how I tightened it down to keep the Gorilla Glue's expansion from moving it out of the pose I wanted. This guy is BIG as seen by the the Bloodmaster by its foot.

@warhammer40k

#hobby #HobbyStreak #40k #Titan #3dPrinting #miniatures #Warhammer40k #WarHamFam #WarhammerCommunity

Canis Wolfborn, complete (lemmy.world)

https://lemmy.world/pictrs/image/4b467691-bfb4-49fc-8b4f-66658d5e93c2.jpeghttps://lemmy.world/pictrs/image/53c4df43-0687-4098-b2ea-8f28404bf249.jpeghttps://lemmy.world/pictrs/image/de05a66a-55de-4154-9c10-01bbb6e6a0f0.jpeg

thatdamnelf, 3 months ago to ageofsigmar

Crushed Crates

Hey there #WarhammerCommunity, I'm trying to make some basing for my titan and I need opinions. I 3d-printed these and then placed a sledgehammer on top before heating to simulate a crushed effect under the tread of the titan. Does it work or should I go for more?

@warhammer40k
#hobby #HobbyStreak #miniatures #WarHamFam #40k #Warhammer40k #3dPrinting

thatdamnelf, 4 months ago to 3DPrinting

A "little" Update on the Titan

One spool of filament down and we're up to the knees on the Warmaster Iconoclast. From the base of the foot to the top of the knee joint is 8.5 inches, so this is going to be a big one when it's done. Currently printing the thighs, which are a 25 hour print-job. Next update in a few days!

Cross-posting to: @warhammer40k & @3dprinting

#hobby #HobbyStreak #titan #Chaos #3dPrinting #miniatures #40k #Warhammer40k #WarHamFam #WarhammerCommunity