So I could get a Muffuletta 6-in-1 #Muff#fuzz#pedal for $200 r/t $250 while they're on sale.
Triangle, Pi, Ram's Head, Russian, Ciivil War. I read that the mids vary. #GAS#guitar#effectPedal#GearSquad
Somebody else's #guitar#pedal on loan.
I want one. The Jag sounds/feels like it's alive through this thing. I hear some people don't like these? #fuzz#muff
Does anybody know of a forum/board/discussion-site for #loopstation or #loopers? My "Boss RC 202" doesn't work well with my footpedal "Digitech FS 3X". (Loopstation has a moment of shock before it loops, resuting in hickups instead of round loops)
Kennt jemensch ein Forum/Board/Diskussionsort für #Loopstations oder #Looper? Mein "Boss RC 202" lässt sich nicht gut mit meiner Fußpedale "Digitech FS 3X" bedienen. (Loopstation hat eine Schrecksekunde, bevor sie reagiert, was zu Schluckaufs statt runden Loops führt)
Ever use a fixed resistor in parallell to a potentiometer on lugs 1 & 3?
How's it work out?
I figure one of equal value would halve the total load but also affect the taper?
EG 10 and 10 would 5 total but (5*10)/(5+10) ~= 3.3 with the pot turned halfway. #GearSquad#pedal#mods
I was hoping to wire a mini jack with bypass to the delay pot, for an expression pedal, but I see that it's soldered directly to the board - no wires.
Still doable, but more difficult. #guitar#pedal#DIY
#guitar#question
Has anyone played with an expression #pedal into a #delay, controlling delay time?
Watching a 1979 Boston concert has me wondering.
Edit: [#GearSquad]
While I was only its CTO for a month before a layoff in 2022, I still dream of owning a Vässla Pedal e-bike (or preferably an unreleased successor that improved a few things).
I hope a company with better operations management buys its intellectual property because this e-bike design was beautiful, functional, and not just a motor bolted onto a bicycle.
⚠️Important info about the lead synth in Europe - The final countdown 🎹
The sound of the keyboard riff used in the recording was achieved by using a Yamaha TX-816 rack unit and a Roland JX-8P synthesizer, as described by Michaeli: "I made a brassy sound from the JX-8P and used a factory sound from the Yamaha, and just layered them together."
@cou@iotar@synths and finally, LFO and envelope changes. Main change is env1 key to off. Env1 sustain is on the long side, probably not needed once the JX is plugged into a Hall Reverb (another key component for the sound). Here, a Zoom Multistomp MS-70CDR with HD Reverb.
I just read that #guitar#amp#wattage should be twice that of the #speakers, and that if too low, the sound will be muffled.
This may explain the #tone I get from my 5 watt tube amp through a Fender GE-412 300 watt cab.