@pbl0m@phpc.social
@pbl0m@phpc.social avatar

pbl0m

@pbl0m@phpc.social

developer && custom-nerd, working on ecommerce stuff more than a decade, led & diy lover, 3D printing fan, community guy. I break stuff at SHOPMACHER. (He/Him).

This profile is from a federated server and may be incomplete. Browse more on the original instance.

heiglandreas, to random
@heiglandreas@phpc.social avatar

I just found my old office tea cup again 😁

It's been a while...

pbl0m,
@pbl0m@phpc.social avatar

@heiglandreas thought it could be a NeXT cup 😬 #JungMenInIT

DrFerrous, to 3DPrinting
@DrFerrous@hachyderm.io avatar

Overnight print is off to a solid start. I haven't done one this big in a while and I'm excited to see how goes the gradient filament. Also, the estimates for how long this print will take are crazy. Maybe it will still be running at 18:00 tomorrow?? That's not what Cura said. But we shall see!

#3DPrinting #MakersGonnaMake #PLA #ender3s1pro

pbl0m,
@pbl0m@phpc.social avatar

@suvidu @DrFerrous same for me, and if you're using octoprint it's even more worse. Don't know why 🤷

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

From the category: "Is that normal?"

I got my first spool prusament PLA and recognized some interesting behavior. After each print, I have to pull out the filament and snip off 7-8 mm of material cause it inflates during the cool down of the printer inside the extruder.

I know that silk PLA inflates but only outside the nozzle.I thought about heatkreep but this would also happen during the print which does not happen in my case🤔

This only happens with prusament, all others don't🤷

Normal size
Inflated size

pbl0m, to random German
@pbl0m@phpc.social avatar

Meanwhile in the basement, the Robo Alpaka 🦙🤖 stated in rainbow 🌈 silk

Really looking forward to this model 😁

Sunday is 😎

Slicer View

pbl0m,
@pbl0m@phpc.social avatar

Aaaaand it turned out awesome 🤩🤩

Right view
Rear view

pbl0m,
@pbl0m@phpc.social avatar

@shochdoerfer @movetodevnull
Aye!🦜

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

3D printed filament spool, from recycled filament, for recycled filament 😎 ♻️

I really like this idea 😁 Looking forward for my recycling filament order.

#3DPrinting #recycling

Side view

beandev, to 3DPrinting German
@beandev@social.tchncs.de avatar

Ich habe mal wieder ein kleines Projekt. Einen 90° Winkel für Abluftrohre von DeLonghi.

Die Frage ist, PLA, PETG oder ABS.

PLA reicht vom Temperaturbereich, schrumpft aber über die Zeit..

PETG ist sehr steif.

ABS über so ein Teil schwer zu drucken.

pbl0m,
@pbl0m@phpc.social avatar

@beandev Ich würde es erstmal in PLA drucken. Ja PLA kann sich über die Zeit verformen, dafür ist das Teil ruck ruck wieder neu gedruckt und getauscht.

Dafür würde ich mir den Stress mit ABS nicht antun. Natürlich unter der Vorraussetzung dass man einfach an das Teil ran kommt um es zu tauschen 😉

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

My wife asked me if could turn her favorite CD into a lamp? This is what I created in a couple hours of #tinkercad 😁

Free 4 all on printables 🤗

https://www.printables.com/model/851878-cd-retro-lamp-compact-disk-lamp

#3DPrinting #diy #LED #CD #retro

pbl0m,
@pbl0m@phpc.social avatar

@heiglandreas feel free to do so and share your results 😊

heiglandreas, to random
@heiglandreas@phpc.social avatar

Heut abend gibt's Mac'n'Cheese, Schwaben-Edition

Kässpätzle!

pbl0m,
@pbl0m@phpc.social avatar

@heiglandreas Ich dachte im ersten Moment an Nudeln ohne alles weil du dir den Käse sparen willst 😬

moira, to random
@moira@mastodon.murkworks.net avatar

this screw sounds like my budgies nattering when they’re happy wtf xD

#maker #budgies #parakeets

pbl0m,
@pbl0m@phpc.social avatar

@moira @NewNordicNormal I actually was asking myself if that will survive the first tour 😄 But if you'll replace it with metal you should be all good😉

On the other hand I'm interested if it's possible to print such a part that would work out🤔 Maybe in carbon fiber with a different orientation.

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

All done 🤩 My first version of a 3D printed bedside table is ready for release 😁

The table is 36cm x 36cm x 55cm and completely 3D printed in 👉👉vase mode👈👈. Technically no glue is needed cause the single parts interlock but for extra stiffness I'll glue the tabletop parts together 😉

The single parts are designed to fit on an ender 3 size bed and will be released soon on printables 😃

Part of the tabletop
The complete tabletop
The finished table

pbl0m,
@pbl0m@phpc.social avatar

Can I print a table in vase mode that's capable of holding 5 spools of filament?

Yes, I can 😁

Should be sufficient as a bedside table 😎

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

First time printing out of a filament dryer. Might be overkill for PETG but hey, it's because I can 😅💁

pbl0m,
@pbl0m@phpc.social avatar

@stooovie 100% true, wet PETG looks like fuzzy skin 😅

pbl0m, to fun German
@pbl0m@phpc.social avatar

Do I repost my own toots?

Of cause! I have small kids, I'm used to repeat myself 😅

Schrank, to random
@Schrank@phpc.social avatar

Good morning world! ☀️

pbl0m,
@pbl0m@phpc.social avatar

🌍: Good morning @Schrank

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

Got a new toy 😁 it's my first one and I got it in a very nice deal. Looking forward to test this thing.

Does everyone has experience with that model or other types of filament dryers?

pbl0m,
@pbl0m@phpc.social avatar

@bobmagicii @hamido I tried that too and it worked but the spools suffered a lot in this process 🙈 So the temperature might be to high 😬 and I think that the oven way is also not the most efficient method from an energy perspective 😅

pbl0m,
@pbl0m@phpc.social avatar

@bobmagicii @hamido irgs 😅 would not work for me, I need them in a box. In a large sealed one with desiccant inside... Just for my inner Monk 😂

Actually I have two of them 🙈

Btw: that's what a spool looks like after a oven trip which went a little bit to hit 🔥😬

stooovie, to 3DPrinting
@stooovie@mas.to avatar

Polyterra PLA at 205/65, Ender 3 with Biqu H2 V2S. Models with large bottom surface warp off the (new) textured PEI bed at corners.

Tried, didn't fix:

  • thorough cleaning with dish soap and IPA

  • bed from 60 to 70C

  • plenty of squish

  • 210-215 hotend temp

  • first layer is at 0.7mm width (I use a 0.6 nozzle as default), 20mm/s

  • fan is off for the first layer

  • mouse ears at corners

  • PEO sheet

I don't other issues with adhesion, even small parts.

Any other tips? Thanks!

pbl0m,
@pbl0m@phpc.social avatar

@stooovie ok, that should be possible without warping 🤔 let me try to print it, just to see if I get similar results.

pbl0m,
@pbl0m@phpc.social avatar

@stooovie so far so flat, it's an Ender 3v2 with poly terra PLA. Let's find out how it looks tmrw. 🤔

Warping test edge view

pbl0m,
@pbl0m@phpc.social avatar

@stooovie ok even after the half of the print, it sticks super flat to the build plate.

Another thing that came to my mind was, have you checked the consistency of your heat bed? Maybe some areas have different temperatures than the others. This could explain why larger PLA prints fail/warp. Cause PLA is super subsceptible to heat changes. So of that's the root cause of the warping, try to turn the heat bed off at all. PLA don't actually need a heated bed to be printed.

Just an idea 😄

pbl0m,
@pbl0m@phpc.social avatar

@stooovie I have 😉 The print already raised the attention of my daughter 😄

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • megavids
  • thenastyranch
  • rosin
  • GTA5RPClips
  • osvaldo12
  • love
  • Youngstown
  • slotface
  • khanakhh
  • everett
  • kavyap
  • mdbf
  • DreamBathrooms
  • ngwrru68w68
  • provamag3
  • magazineikmin
  • InstantRegret
  • normalnudes
  • tacticalgear
  • cubers
  • ethstaker
  • modclub
  • cisconetworking
  • Durango
  • anitta
  • Leos
  • tester
  • JUstTest
  • All magazines
    •