While de N100 is a great value and low energy processor for a jellyfin server (especially if you direct play everything as is my case), I think if the objective is 4k hdr 10bit it will fall short as in my experience it usually transcodes at 8-9fps.
Yeah after seeing this and another very detail answer it looks line my settings are too demanding and that is causing a slowdown. Since i do direct playing on everything i might just turn them down for the one friend who seems to be always on the weirdest player that needs transcoding. Thanks all!!
Seems to have the same issues as the other software. After digging for a while seems that AMD changed the way their driver works for RDN3 cards and the zero rpm “feature” is not exposed yet to the kernel. There are some issues tracking progress but as far as i can tell AMD isn’t prioritizing the issue so who knows when this will be fixed…
In one of the gh issues someone fixed it by bypassing the vrm connector directly to the motherboard. In their model it was doable without having to disassemble anything. I don’t feel comfortable doing that so for now the only thing to do is wait…
Hi, I loved the new spider-man movies and also always loved the character. I would love to play Spiderman remastered these holidays!! Thank you for the giveaway OP!! Happy Holidays to everyone too!
Have you been spending hours trying to pass a level? Or maybe you are completely addicted to a newly bought game. Do you have a question about a game or would like to share something else? In the Weekly Discussion Thread, you can do it all!...
yeah i agree, the biggest problem for me in JRPGs is that i just don’t have the time and sometime the attention span to keep playing. This one for now it’s working, although i’ve only played for a couple of hours.
I find myself trying to stream a heavy movie, on a local network but it transcodes it due to the original file exceeding maximum bitrate. I’ve checked the settings but the only one which seem to control this is set at 0 which is unlimited (i guess). Is there any way to bypass this limit if so? The overall bitrate of the movie...
Oh that is an extremely different experience that what I’m having! Chromecast works fine for me and i never have to restart anything and no problems with scrubbing either, just a bit slow on shows with a lot of episodes (300+). I have given my friends access to my server and most of them are using it just fine (sure with some issue now and then, as you said its not perfect). And in iOS with the alternative Swiftfin client the experience feels phenomenal!!
Yes! Usually the ones that come with the media are fine for me but i also have the open subtitles plugin to download extra ones in my language. There are no problems 98% of the time and the other 2% its just that they won’t load and I just have to select/download different ones.
Luis Chamberlain sent out the modules changes today for the Linux 6.6 merge window. Most notable with the modules update is a change that better builds up the defenses against NVIDIA’s proprietary kernel driver from using GPL-only symbols. Or in other words, bits that only true open-source drivers should be utilizing and not...
Bingo! This worked. I don’t fully understand why because i expose the ports on the docker containers, i guess i must have something miss-configured. Thanks!!
I think you are right! Now that you’ve explained it, it makes sense in my head, as someone else recommended i added hostnames and now i can work with those which makes it nicer, i don´t want to be opening a maze of ports xd
Thats good!! i’m now looking at how to set up caddy to do exactly just just that, then i’ll look at the vpns for outside connections. Thanks gor the advice!
I got it to run, its fairly simple but i am having issues integrating it into the docker compose as it just… stops working… i’ll be looking into it today and tomorrow and if i succeed i’ll report back to you with findings.
I was just starting to fiddle with the Starr programs so i didn’t realize that the proper way to use it is to sync the torrent clients directly to sonarr and radarr. The issue happened on those programs all the same though. (fixed it already though)
Self-hosted Jellyfin CPU or GPU for 4K HDR transcoding?
Hey everyone, I’m building a new server to run Jellyfin (with a few other services like Pi-hole) and I’m stuck on GPU or CPU transcoding....
Disable Zero RPM on RX 7900 xtx on Linux
Hi all!...
Need help choosing for a new case that will fit my components
Hi all!...
Holiday Giveaway - Steam Codes! - Giveaway Ended
EDIT January 6, 2024:...
Progress Report October 2023 · yuzu (yuzu-emu.org)
The Weekly 'What are you playing?' Discussion (lemmy.world)
Have you been spending hours trying to pass a level? Or maybe you are completely addicted to a newly bought game. Do you have a question about a game or would like to share something else? In the Weekly Discussion Thread, you can do it all!...
Does jellyfin have a default unchangeable maximum bit-rate?
I find myself trying to stream a heavy movie, on a local network but it transcodes it due to the original file exceeding maximum bitrate. I’ve checked the settings but the only one which seem to control this is set at 0 which is unlimited (i guess). Is there any way to bypass this limit if so? The overall bitrate of the movie...
deleted_by_author
Progress Report September 2023 · yuzu (yuzu-emu.org)
Has anyone tried Super Mario Bros Wonder ?
I know it has just been released but it usually people are quick to try it out. I’m just curious how it performs ?
Linux 6.6 To Better Protect Against The Illicit Behavior Of NVIDIA's Proprietary Driver (www.phoronix.com)
Luis Chamberlain sent out the modules changes today for the Linux 6.6 merge window. Most notable with the modules update is a change that better builds up the defenses against NVIDIA’s proprietary kernel driver from using GPL-only symbols. Or in other words, bits that only true open-source drivers should be utilizing and not...
Help needed configuring prowlarr with qBittorrent
Hi all, i’m having issues configuring prowlarr to use the qbit torrent downloader. I have everything setup in a docker container as such:...