JamesAkers,
@JamesAkers@expressional.social avatar

Tomorrow is Xenon day! Jon from work fabbed the aluminum holder. I finished an pumped the rest of the current jobs tubes (34 tubes) an then fabbed this little sidearm.

I actually had to wipe out the seacrest phosphor from the tube as 9mm is sort of a hard to find size.

I opened the robbins and dumped the propane left between valves. Gonna let it vacuum out overnight. I can't believe I got a vacuum seal first try!

The prepared sidearm. I ended up cutting the bottom right down a little so I could more easily fit it onto the manifold
10, pineapple ovals- just pumped, pre mercury addition, traps still on. The yellow ovals are neat stacked up, and its quick to age them all in wired up like that.
Leak checking. I filled the manifold to 8 torr of propane and left it- to check for leaks in the vacuum fittings with the new side arm. First try was perfect. It's nice having another knob there😋

  • All
  • Subscribed
  • Moderated
  • Favorites
  • aitools
  • DreamBathrooms
  • mdbf
  • ethstaker
  • magazineikmin
  • GTA5RPClips
  • rosin
  • thenastyranch
  • Youngstown
  • osvaldo12
  • slotface
  • khanakhh
  • kavyap
  • InstantRegret
  • Durango
  • provamag3
  • everett
  • cisconetworking
  • Leos
  • normalnudes
  • cubers
  • modclub
  • ngwrru68w68
  • tacticalgear
  • megavids
  • anitta
  • tester
  • JUstTest
  • lostlight
  • All magazines