@Gormadt@lemmy.blahaj.zone
@Gormadt@lemmy.blahaj.zone avatar

Gormadt

@Gormadt@lemmy.blahaj.zone

I do a lot of photography and I share it on my deviant art page.

It’s SFW, don’t worry.

This profile is from a federated server and may be incomplete. Browse more on the original instance.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

As the saying goes: if you only have one backup you have zero backups.

How the fuck does Google of all companies manage to accidentally delete that‽

Gormadt, (edited )
@Gormadt@lemmy.blahaj.zone avatar

I’m someone who owns a few guns and even I think owning .50 cal guns is stupid.

The ammo is stupid expensive, it kicks like a cladsdale, and there’s nothing you can hunt (legal or otherwise) here that would require it.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

You mean evil

And no, they can’t stop

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Visa is rolling out technology that will allow you to tap your card on your smart device to add it to your wallet. You’ll also be able to tap your card to your phone to confirm a transaction without needing to input any additional information.

So like almost any tap to pay system?

Shit I was doing this stuff with GPay for years.

Within a decade, you’ll likely access all of your cards with one credential and choose which payment method you’d like to use. That includes not just credit and debit cards, but also buy now, pay later options and direct payments from your bank account.

This is just PayPal.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Of course it did

It’s 2 that his party would get rid of if they could

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Not wanting to be filmed backstage at an event seems pretty normal IMO as backstage is where a lot of prep work happens. It probably not safe for untrained personnel and/or might reveal things that people don’t want on camera (like costume malfunctions that are being worked out)

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Have you run a PID tune?

And when you installed your thermal probe and heater cartridge did you use thermal compound?

Edit: Sorry for the really basic questions but in my experience clogging issues typically have a frustratingly simple solution.

Edit2: Does your printer have a screen not connected to Klipper?

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Do you have the correct thermister type set in the firmware? If there’s a reporting difference that could be why. (This one bit me on my first 3D printer rebuild, now I’m way more vigilant about it)

Without a nozzle installed are you able to push the filament through the hot end? (This one bit me on one of my printers due to faulty hot end and there being a piece of metal partially obstructing the filament path. Sucked to diagnose but was an easy fix once it was found)

Is everything on the hot end tightened down still? (This one bit me a few weeks ago after a couple bolts on my hot end worked themselves lose after months of use)

Is your extruder still functional gripping the filament? If it can’t grip properly (or is jamming) this can cause clogging issues.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

No worries

And dang that it’s not one of those things as the things I mentioned in my comment are relatively easy to fix

Edit: Best of luck on solving it and I really hope to see you post about how you fixed it as I’m hella curious

Colorblindness and editing in Lightroom (or other software)

So I’ve got a bit of color blindness going on (a bit blue and yellow, a bit more red and green (not to mention some colors are painful but that’s a different story lol)) and I had a question about editing pictures to show what different colorblindness looks like. My friends keep asking me how I see things and I’d love to...

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Unfortunately sometimes war is unavoidable

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Nah I’m good, thank you for thinking of us though

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

When I used to play MTG one of the LGSs I used to play at had a policy of, “If you play with proxies they much be cleared by the judge first.”

Almost everyone with anime proxies got told they couldn’t use them due to them almost always being NSFW. The people with sharpied basics almost never got turned down. The anime proxy dudes who got turned down always got pissed when they got told no.

They were pretty good on a lot of things but the regulars who’d show up to games were eventually the reason I stopped going there.

I do miss MTG sometimes but I don’t miss the local MTG groups at all.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Hope is key to acting

Using hope as a driving factor for acting to bring the change you want to see

For example: I hope to see better pedestrian focused infrastructure in my community therefore I act in a way to make that happen. I call my reps, I talk with people I meet about it, etc.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Those targeted ads aren’t messing around

Edit: Personally I’ve already got an urn picked out for me. A probably too large coffee can of my favorite coffee brand.

I’d prefer it not get used for my ashes for at least a few more decades though.

The State Department said that Israel's military campaign in Gaza may have violated international law. (www.nytimes.com)

The Biden administration has concluded it is “reasonable to assess” that Israel’s military campaign in Gaza has violated international law, but has not found specific instances that would justify the withholding of military aid, the State Department told Congress on Friday....

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

I feel the same way

But in terms of international politics such accusations must be made carefully and with substantial evidence

I feel they could have had that evidence awhile ago but I’m hoping they took this long to make sure to get as many as possible correctly in the net of “Violating International Law”. For example substantial evidence that goes very high up the chain of command of the Israeli military.

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Hell yeah that’s freaking awesome

I hope to see these become popular someday and with that kind of increase they’re likely to get a shit ton of funding

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

So many people commuting to jobs that could easily be done from home nowadays

I work in the freight industry in a position I can’t do from home but when the whole work from home thing was in full swing I didn’t get stuck in traffic except a few times when the local drawbridge went up

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

Probably SEO reasons to help it pop up if you search his name there by driving more traffic to their site

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

I live in the PNW, this is legit my strategy

It can get pretty grubby during the summer months though

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

An easy way to check is to see who gets mad about removing Confederate statues.

It’s not the Democrats

Gormadt,
@Gormadt@lemmy.blahaj.zone avatar

No wonder it died

It didn’t have enough food

Gormadt, (edited )
@Gormadt@lemmy.blahaj.zone avatar

For those not too good at unit conversions:

1 hectare is 10,000 sqft

1 hectare is also 2.47 acres

So the ice field is less than 20,000 sqft, less than 4.9 acres.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • megavids
  • kavyap
  • thenastyranch
  • mdbf
  • DreamBathrooms
  • InstantRegret
  • magazineikmin
  • Youngstown
  • GTA5RPClips
  • slotface
  • modclub
  • everett
  • Durango
  • rosin
  • cisconetworking
  • tacticalgear
  • khanakhh
  • vwfavf
  • ngwrru68w68
  • Leos
  • normalnudes
  • ethstaker
  • tester
  • cubers
  • osvaldo12
  • anitta
  • provamag3
  • JUstTest
  • All magazines